Loading ...
Loading ...
Loading ...
12 OPERATING INSTRUCTIONS
Eco (ENERGY SAVER) MODE:
The unit is factory set to run in Eco (energy
saver) mode. We recommend leaving the
unit in Eco mode to help save energy and
money. However, if you would like to switch
out of Eco mode, press the mode button until
another mode is selected.
In Eco mode, the fan will continue to run for 3
minutes after the compressor shuts o. The
fan then cycles on for 120 seconds at 10
minutes intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on.
YOU WILL SEE:
DO THIS:
PRESS MODE
BUTTON
CHOOSE Eco
NOTE:
Please note, that if the unit is changed to
'Cool' or 'Fan only' mode then shut o, the
unit will turn back on in Eco mode. This is
mandatory per government regulations. If
the unit is changed to 'Cool' or 'Fan Only'
mode and a power failure occurs, once the
power is restored the unit will return to
'Cool' or 'Fan Only' mode.
TO ACTIVATE THE CHILD LOCK FEATURE:
DO THIS:
PRESS AND HOLD THE
“Mode” BUTTONS FOR 3 SECONDS
Note: Press and hold the “Mode” button for 3
sec can activate or deactivate the LOCK
function. The control panel will be lock and
the setting can not be changed.
YOU WILL SEE:
CHECK DUST FILTER FEATURE:
Note: This feature is a reminder to clean the Dust
Filter (See Care and Cleaning) for more ecient
operation. The LED (light) will illuminate after
250 hours of operation. To reset after cleaning
the filter, hold the "Fan" button 3 seconds and
the light will go o.
RESET DUST FILTER LIGHT:
DO THIS:
HOLD FAN BUTTON
3 SECONDS
Loading ...
Loading ...
Loading ...