Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
The door has been opened often. Open the door only if necessary.
The Extra Freeze function is
switched on.
Refer to "Extra Freeze function"
section.
The Extra Cool function is switch‐
ed on.
Refer to "Extra Cool function"
section.
There is no cold air circulation in
the appliance.
Make sure that there is cold air
circulation in the appliance. Refer
to "Hints and tips" chapter.
appears on the dis‐
play.
The appliance is in the demon‐
stration mode.
To exit the demonstration mode,
press and hold the Extra Cool
and ECO buttons for approxi‐
mately 10 seconds until you hear
3 short beeps.
The symbol appears
and the alarm indicator is on.
Communication problem. Contact the nearest Authorised
Service Centre. The cooling sys‐
tem will continue to keep food
products cold, but temperature
adjustment will not be possible.
The or or
symbol and the cur‐
rent setting appear alternately ev‐
ery 5 seconds and the alarm indi‐
cator is on.
Temperature sensor problem. Contact the nearest Authorised
Service Centre. The cooling sys‐
tem will continue to keep food
products cold, but temperature
adjustment will not be possible.
If the advice does not lead to the
desired result, call the nearest Authorized
Service Centre.
8.2 Replacing the lamp
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service
Centre.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
48 ENGLISH
Loading ...
Loading ...