Loading ...
Loading ...
Loading ...
14 C6647M (10/21)
Surface Mount: Ceiling or Wall
INSTALLATION GUIDE
The Sarix Enhanced 3 Series Bullet Camera can be installed directly to a wall or ceiling with the integrated 3-axis adjustable bracket mount
1. Using the Mounting Template, mark the position for two (minimum) or up to six (maximum) of the mounting hole locations to be used as
well as the cable entry position in the middle.
a. NOTE: If the screw holes are
blocked by the camera body, loosen the three screws, but do not detach the screws. Then rotate the
camera body to reach the screw holes.
Figure 3. Ceiling Mount
2. Using a 1/4” drill bit, drill the mounting holes.Press in the plastic anchors (supplied) into the holes.
3. Using a 1” to 1-1/2” drill bit, drill out the cable entry hole.
4. Feed the cables through the opening.
5. Refer to the Connecting the Cables section before proceeding.
6. Push the cables back through the hole into the wall/ceiling, and then attac
h the Mounting Base to the wall using the M4x25mm screws
(supplied).
7. Proceed to the Positioning the Camera section to complete the installation.
Loading ...
Loading ...
Loading ...