Loading ...
Installation Steps
www.SereneLifeHome.com
1 2
3 4
5 6
7
8
Double-sided tape
First, determine the installation position.
Clean installation position with a wet cloth then make
it dry. Peel o the double-sided tape on the bottom
surface of the door suction base.
Door suction head
Place the door suction on the oor as shown.
Note: The door suction head should be tightly attached
to the bottom surface.
3M tape template
Stick the 3M tape template on
the oor along the edge of the
door suction base.
Note: After the product is
pasted, press it rmly with your
hand for 30 seconds. Allow the
double-sided tape to remain
static for more than 12 hours to
achieve the best strength.
The xed position of the tape
should be kept dry.
Swing the door towards
the closing direction and
take o the door suction
head horizontally along
the oor.
Peel o the tape, align the door suction head base with
the position of 3M template and attach the door suction
head to the oor. Peel o the 3M template tape after
nish.
Abnormal Handling
If the lock tongue is receded as
shown, use the tool to pull it out.
Check to ensure the roller and
lock tongue is well aligned.
Usually the roller (position 1) of
should be 1mm lower than the
lock tongue (position 2).
1
2
±4
Door suction head
If readjustment is needed, loosen the xing screw,
the oor suction head can be adjusted by 4mm