Loading ...
Loading ...
Loading ...
12
DOOR HANDLE INSTALLATION
Door Handle Mounting Instructions
1. Remove handle from carton and any
other protective packaging.
2. Position handle end caps over upper
and lower pre-installed shoulder
bolts (A) that are fastened into door,
ensuring the holes for the set screws
are facing toward the hinge.
3. While holding handle firmly against
door, fasten upper and lower Allen set
screws (B) with supplied Allen wrench.
A
B
CAUTION
Wear gloves and use extreme CAUTION
when installing these handles. The rounded
end of the handles may be sharp.
NOTE
All set screws should be tightened and
sub-flush (Allen set screw should be seat-
ed just below the surface of the end cap)
of handle end cap. The end caps should
be drawn tight to door with no gaps.
Loading ...
Loading ...
Loading ...