Loading ...
Loading ...
Loading ...
8
Figure 2-23 Install Installation Plate to Junction Box Cover
6. Fit the camera onto the installation plate.
Figure 2-24 Fit Camera
7. Turn the camera clockwise until it snaps into the
installation plate.
Figure 2-25 Snap Camera into Installation Plate
8. Secure the junction box body on the ceiling with four
PA4 × 25 screws.
Figure 2-26 Secure Junction Box Body
9. Route the cables through the bottom cable hole or
the side cable hole of the junction box and connect
the cables.
10. Combine the junction box cover with its body with
four PM4 screws.
Figure 2-27 Combine Junction Box Cover with Body
Loading ...
Loading ...
Loading ...