EGO MBB2100 User Manual

Loading ...

56-VOLT LITHIUM-ION POWER HEAD—PH140016

MOUNTING AND ADJUSTING THE

FRONT-ASSIST HANDLE

WARNING:

Always remove the

battery pack from the product when you

are assembling parts, making adjustments,

cleaning, or when the product is not in use.

1. Stop the motor and remove the

battery pack, if installed.

2. Loosen the four screws in the front-

assist handle with the supplied hex

wrench and remove the screws and

lower clamp from the front-assist

handle (Fig. 3).

3. Attach the front-assist handle and

lower clamp on the power-head

shaft and secure them by pre-

tightening the four screws. Turn the

front-assist handle upwards so that

it points toward the top of the rear handle (Fig. 4).

4. Adjust the front-assist handle position between the rear handle housing and the

coupler on the power-head shaft (Fig. 4).

5. Tighten the four screws so that the handle cannot be rotated on the shaft.

WARNING:

Never operate the tool without the front-assist handle ﬁrmly in place.

Lower Clamp

Front-Assist Handle

Screws

Coupler

Power-head Shaft

Rear Handle

Housing

Loading ...

EGO MBB2100 POWER+ Bristle Brush Attachment & Power Head Tool Only