Loading ...
Loading ...
Loading ...
ENGLISH 25
●
●
●
●
NOTE
Load the laundry and add detergent
and fabric softener. Make sure the load
size does not exceed the maximum
drying capacity of the machine.
1.
Turn the knob to set a wash program
which can select drying option (refer to
Program Chart on page 12), according
to your clothes then press Wash/Dry
Mode touchpad to switch your machine
to Wash and Dry ( ) mode.
2.
Set the drying time by pressing
“Time Dry ” touchpad repeatedly
until desired drying time reached.
The display will then show the whole
duration of wash & dry cycle.
4.
Start the program by pressing
Start/Pause touchpad. The time
remaining is updated every minute on
the display.
5.
At the end of the program press the
On/Off button to switch the machine
off.
6.
Select the required options by
pressing the relevant touchpads. If
possible, do not select a spin speed
lower than that proposed by the
machine to avoid unnecessary longer
drying time therefore saving energy.
3.
At the end of the program press the
On/Off button to switch the machine off.
6.
7.2 Washing Program + “Time Dry ” Option
NOTE
Some drying level options are not
available for some programs.
If you set only 10 minutes of drying,
the appliance performs only a
Cooling ( ) phase.
●
When “Iron Dry ” option is selected,
the display time will be adjusted after
approximately 15 minutes from the
start of the program, based on the
laundry type and load size.
The display will show the new adjusted
time.
●
When “Extra Dry ” or “Cupboard
Dry ” is selected the display time
will be adjusted towards the end of the
drying cycle when machine senses
required dryness level has been
achieved. In case of laundry quantity
lower than maximum load capacity,
the time remaining can suddenly
decrease from e.g. approximately
minutes to .
If you wish to open the door during the
anti-crease phase or interrupt it, press
Start/Pause touchpad.
If you wish to open the door during
the anti-crease phase or interrupt it,
press Start/Pause touchpad.
At the end of each drying cycle,
the temperature of your clothing
will be high. For your safety,
please leave the door open to let
your clothes cool before
removing your laundry.
At the end of each drying cycle,
the temperature of your clothing
will be high. For your safety,
please leave the door open to let
your clothes cool before
removing your laundry.
If a program is not compatible
with the drying option selected,
the symbol “ ” will flash on
display.
/
Loading ...
Loading ...
Loading ...