Loading ...
Loading ...
Loading ...
Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
109
Max. Size: 1.5*2.5(m)
Detection Target: Human.
Figure 9-20 Configure the Rule
Filter type: Pixels and Actual Size are selectable. If Pixels is selected, draw the
area of maximum size and minimum size on the live video for each rule. If
Actual Size is selected, input the length and width of the maximum size and
minimum size. Only the target whose size is between the minimum value and
maximum value will trigger the alarm.
Note: Make sure the camera calibration is configured if actual size is
selected.
Sensitivity. The higher the value is, the more likely to trigger the alarm.
Detection Target: Select Human, Vehicle, or Human & Vehicle as the
detection target. You can also select all to detect all moving objects as the
target.
Background Interference Suppression: Eliminate the environment
interference to reduce the false alarm. For example, the wind blow grass. ON,
OFF and Self-Adaptive are selectable.
Draw line/area: For line crossing detection, you have to draw a line, and
select the crossing direction, which is bidirectional, A-to-B, or B-to-A. For
other events such as intrusion, region entrance, region exiting, etc., you have
to left click on the live video to set the end points of the area and right click
to finish the area drawing.
Note: If the live view is stopped, the detection area / line cannot be draw and
the rules cannot be set.
Loading ...
Loading ...
Loading ...