Loading ...
Loading ...
Loading ...
6. 7.
B F U
T C
1. Read all instructions and important safeguards.
2. Remove all packaging materials and check that
all items have been received in good condition.
3. Tear up all plastic bags and dispose of them
properly as they can pose a risk to children.
4. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand will not fit
inside the kettle, swish warm, soapy water around
in the interior of the kettle with the kettle lid on.
Take care to keep the electrical components on
the exterior of the kettle dry.
5. Rinse and drain any remaining soapy water from
the kettle.
6. With a damp cloth, gently wipe the exterior of the
kettle. Do not wipe electrical components as this
may cause damage to the unit.
7. Dry the interior and exterior of the kettle
thoroughly before placing the kettle onto the
power base.
8. Following the instructions in “Boiling Water” on
pages 7-8, boil 4 cups of water. Once the water
has boiled, pour it out then rinse the inside of the
kettle once more with warm water. The kettle is
now ready for use.
1. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand will not fit
inside the kettle, swish warm, soapy water around
in the interior of the kettle with the kettle lid closed.
2. Rinse and drain any remaining soapy water from
the kettle.
3. With a damp cloth, gently wipe the exterior of the
kettle. Do not wipe electrical components as this
may cause damage to the unit.
4. Dry the interior and exterior of the kettle
thoroughly before placing it back onto the power
base.
1. Place the power base on a sturdy, level and dry
surface.
2. Open the kettle lid using the lid release button and
fill with water. Water must be filled between the
MIN and MAX levels.
3. Close the lid ensuring it locks into place.
4. Make sure the bottom of the kettle is completely
dry then place the kettle onto the power base.
5. Plug the power cord into an available 120V AC wall
outlet.
6. Press the power switch down. The power switch
will illuminate and the kettle will begin heating.
7. Once the water reaches a boil (212°F), the power
switch will flip up and the kettle will automatically
shut o.
T
B W
Note:
· If the problem persists,
please contact our
customer service
department at 1-800-
276-6286 or by email
at CustomerService@
AromaCo.com.
Caution:
Never attempt to
disassemble the kettle or
the power base.
Always take care not
to allow electrical
components to come
into contact with water.
Never immerse the
kettle, power cord, plug
or power base in water.
Do not use abrasive
cleaners or scouring
pads of any kind on the
kettle or power base.
This will cause damage
to the finish and may
create a risk of electrical
shock.
Always unplug the
kettle and allow it to
cool completely before
cleaning.
continued on next page>>
The kettle will not begin heating when the power
switch is down.
· Make sure the kettle is seated properly on the
power base and that the base is connected to
a functioning electrical outlet.
· Make sure the minimum amount of water is in
the kettle. If the kettle cannot detect liquid, the
internal safety mechanism will automatically
turn the kettle o. However, the power switch
will not automatically return to the OFF
position. Remove the kettle from the power
base and fill with at least 3 cups of water then
return to the power base. The kettle will begin
working again once the internal temperature
has dropped to a safe level.
· Water or debris on the bottom of the kettle
or on the power base may interfere with the
functioning of the kettle. Be sure that the base
of the kettle and the power base are dry and
free of debris.
There are mineral deposits on the interior of the
kettle.
· A certain amount of scale build-up is normal
after use and is caused by minerals contained
in hard water. To remove deposits, refer to
"Mineral Deposits" on page 8.
Loading ...
Loading ...
Loading ...