Loading ...
Loading ...
Loading ...
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
2.1.1 Ceiling Mounting Without Junction Box
Steps:
1. Rotate the camera to align one of the marks with
the notch, and dissemble the camera.
Mark
Notch
Figure 2-1 Align the Mark and the Notch
2. Pry the enclosure open with a flat object, for
example, a coin, to dissemble the camera.
Figure 2-2 Dissemble the Camera
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-3 Drill Template
5. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
Loading ...
Loading ...
Loading ...