Loading ...
Loading ...
Loading ...
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the junction box.
5. Fix the camera to the junction box cover with three
PM4 × 10 screws.
Figure 2-3 Fix the Camera to the Junction Box Cover
6. Secure the junction box body on the wall with three
PA4 × 25 screws (supplied).
Figure 2-4 Secure the Junction Box on the Wall
7. Route the cables through the bottom cable hole or
side cable hole of the junction box and connect the
cables.
8. Fix the junction box cover on its body with three
PM3 × 16 L6 screws.
Figure 2-5 Fix the Cover to Its Body
9. Refer to Step 6 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to finish installation.
2.2 Installation of Type III Camera
2.2.3 Ceiling Mounting Without Junction Box
Steps:
1. Rotate the camera to align the mark with the notch.
Insert a coin or another tool into the notch, and
press down to dissemble the camera.
Notch
Mark
Coin
Figure 2-6 Dissemble the Camera
2. Paste the drill template (supplied) to the place
where you want to install the camera.
Loading ...
Loading ...
Loading ...