FLUKE 1586A/2HC User Manual for the Fluke 1586A/2HC Super-DAQ Precision Temperature Scanner with high-capacity module

Loading ...

Scan/Monitor, Record, and Data

Scan 4

4-7

hcn036.eps

Figure 4-3. Test Setup Menu Example

Trigger Type

The Trigger Type tells the Product when and how to start and stop a scan. There are four

trigger types:

Note

If a Scan Count of 0 is set or if the scan interval is shorter than the scan

sweep time, the scan continuously repeats until the scan is stopped or the

Product runs out of memory.

• The

Interval trigger type sets the scan to happen on a user-defined numeric interval

that is started by a front-panel softkey in the Scan/Monitor menu. The user sets the

number of times to scan (Scan Count) and how often the scans occur (Interval).

• The

External trigger type sets the scan to start when a set TRIG input on the Digital

I/O port detects a low condition. Like Interval, the user manually sets the number of

times to scan (Scan Count) and the time between the scans (Interval).

• The

Alarm trigger type sets the scan to start when a HI or LO channel alarm is tripped

on a monitored channel. Like Interval, the user manually sets the number of times to

scan (Scan Count) and the time between the scans (Interval).

• The

Manual trigger type sets the scan to happen only when the user manually pushes

the Scan/Monitor key on the front panel. This trigger type lets the user set the number

of times to scan (Scan Count) when the key is pushed, but does not have an interval

time because the interval is a manual key push.

• The Automated Test trigger type lets the user define a test sequence to run without

the need of user interaction. See “Automated Test” on page 4-16 for more

information.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 1586A/2HC Super-DAQ Precision Temperature Scanner with high-capacity module