SPILL KITS (15LTR, 30LTR OR 50LTR)
MODEL NO: SCK15.V3, SCK30.V3 or SCK50.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9 Store in a dry easily accessible area.
IMPORTANT: Make sure the kit is in a known location.
WARNING! Find out the nature of the spilled substance, it may help to deal with it more
effectively.
IMPORTANT: Try to locate the source and stem the flow, put a drip tray or bucket in place.
9 Be aware of the safety requirements (C.O.S.H.H.) for all stored fluids in your workshop.
9 Wear safety equipment as advised in (C.O.S.H.H.) statements when using fluid or cleaning
up after a spillage.
9 Evacuate the area and notify anyone nearby, then get help immediately.
9 Seal off area with a barrier, tape or a sign.
9 Check that no-one is injured, seek medical advice.
9 Mark in permanent felt tip pen the fluid contained in the “HAZARDOUS WASTE ONLY” bag.
9 Dispose of hazardous waste immediately and responsibly.
8 DO NOT use any single item in the kit more than once.
8 DO NOT use the kit for any purpose other than for which it is designed.
8 DO NOT use whilst eating, drinking, smoking; under the influence of drugs, alcohol, intoxicating medication, or if fatigued.
2. INTRODUCTION
Designed to absorb spills and drips with a maximum capacity of 15L. Contains a range of high quality absorbents, including high-
grade polypropylene pads that can absorb up to 1L of uid and featuring a double weight cover stock for maximum absorbency.
Supplied with 1.2m absorbent sock specially designed to absorb up to 5L of uid and create barriers to keep spills from spreading.
Suitable for use with oil, petrol, diesel, coolants, mild solvents, water and other spills. Full list of absorbent applications provided in
each kit. Supplied in a resealable storage bag.
3. SPECIFICATION
4. OPERATION
4.1. Shallow spills and final absorption of a spill should be carried out using pads,
but only once containment is complete. The pads should be left in contact with the
fluid for about two or three minutes, or until saturated. Each pad will contain up to
one litre of fluid approximately, depending upon viscosity.
4.2. When using the absorbent sock, it should be used to form a temporary dam to
contain fluid and not as a mop. A nominal 300mm overlap of ends to contain fluid is
suggested. (Smaller spills would require the SCK15 kit, medium spills SCK30 kit
and larger spills SCK50 kit). All sold Separately.
4.3. Included in the kit is a large clearly marked disposal bag and associated tie. All
used absorbent’s should be packed in the disposal bag and the contents indelibly
marked in the spaces marked “PRODUCT” and “CATEGORY”.
4.4. Dispose of immediately, following all local environmental guidelines.
SCK15.V3, SCK30.V3, SCK50.V3 Issue 3 (H) 10/05/2024
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
Wear a mask
Model No: SCK15.V3 SCK30.V3 SCK50.V3
Capacity: 15L 30L 50L
Contents: Pad (x10), Sock, Disposal Bag with
Ties (x1)
Pad (x15), Sock (x3), Disposal Bag
with Ties (x1)
Pad (x25), Sock (x5),
Disposal Bag with Ties (x1)
Sizes: Pad - 500 x 400mm, Sock - 80mm x
1.2mm
Pad - 500 x 400mm, Sock - 80mm x
1.2mm
Pad - 500 x 400mm, Sock -
80mm x 1.2mm
Handling a Spill - Quick Guide
1
Move away and get help
2
Make the area safe
3
Assess for injuries
4
Identify the spillage
5
Fetch the spill kit
6
Put on appropriate PPE
7
Limit contamination
8
Contain the spillage
9
Mop up the spill
SCK50.V3
SCK15.V3, SCK30.V3, SCK50.V3 Issue 3 (H) 10/05/2024
Original Language Version
© Jack Sealey Limited
SCK30.V3 SCK50.V3
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts
without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please
email or call our technical team on technical@sealey.co.uk or 01284 757505.
IMPORTANT: No Liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
