Loading ...
Loading ...
Loading ...
www.PyleUSA.com www.PyleUSA.com
1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Belt Clip: Attach the transmitter to the belt.
4. Audio Input Jack: Suitable for lavaliere system/headset system.
5. Low Battery Indicator: Red light glows when it is lack of power and should
renew the battery.
6. LCD Information Display: Show thetransmitter frequency channel etc.
7. Gain Adjusting Volume: Adjust the transmitter audio input gain.
8. State Setting Switch: Set the using state of lavaliere system (L)/headset
system (H).
9. Up Function Button: Sets channel data.
10. Down Function Button: Sets channel data.
SYSTEM CONNECTIONS
1. Receiver Power Connection: Connect the AC adapter into the DC power
connector on the back of the receiver. Plug the AC adapter into a AC 120V /
220V 50Hz outlet.
2. Antenna: Keep the position of antenna at a 45 angle from vertical.
(Shown as below)
3. Audio Connection: Connect the audio cable from the audio output on the
receiver to the input on your amplier equipment
5 6
BODYPACK TRANSMITTER CONNECTION
1. Lavaliere Microphone Connection: Connectthe connecter of supplied
lavaliere microphone to the connecting jack of transmitter(shown as below)
Set the transmitter work state in wireless lavaliere system (L).
2. Headset Microphone Connection: Connect the connecter of supplied
headset microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless headset system (H).
3. Guitar Cable Connection: Connect the connector of supplied guitar cable
to the connecting jack of transmitter and the other connecter to guitar
(shown as below), set the transmitter work state in wireless guitar system (G).
Loading ...
Loading ...