Loading ...
Loading ...
Loading ...
Figure 2-3 Add Device
3. Select OTAP as Adding Mode.
4. Enter the required
informaon.
Name
Enter a descripve name for the device.
IP Address
Enter the IP address of the device.
Port
Set the port number of the device. The default port number
is 80.
User Name
Enter the user name set when the device is
acvated. By
default, the user name is admin.
Password
Enter the password set when the device is acvated.
5. Oponal: Check TLS to enable transmission encrypon using
TLS (Transport Layer Security) protocol for security purposes.
Note
●
This funcon should be supported by the device.
●
The client does not support security cercate
authencaon. Imporng a trusted device cercate is not
required. You only need to set Enhanced SDK Service Port
(443 by default) to enable transmission
encrypon.
6. Check Synchronize Time to synchronize the device me with
the PC running the client.
7. Oponal: Check Import to Group to create a group by device
name, and import all channels of the device to this group.
8. Click Add to
nish device adding, or click Add and New to
connue adding another device.
3
Loading ...
Loading ...
Loading ...