Loading ...
Loading ...
Loading ...
Thermal Imaging Scanner
Unpacking the Imager
3
Unpacking the Imager
Carefully unpack the following items:
• TiS Thermal Imaging Scanner
• AC Power Adapter/Charger
• Rugged Carrying Case
• SD Memory Card
• SD Card Reader
• Soft Transport Bag
• SmartView
®
Software
• Warranty Registration Card
Note
Fluke recommends the use of the supplied SD memory card with the
Imager. Fluke does not warrant the use or reliability of aftermarket
SD memory cards of different brands or capacities.
Charging the Battery
Before using the Imager for the first time, charge the battery for at least two
hours. The Imager’s battery condition is displayed in the upper-left corner of
the display. When the last segment of the battery icon extinguishes, the Imager
will shut down and will require recharging before operating again. To charge
the Imager’s battery:
W Caution
To avoid damage to the Imager, remove it from the dc car
charger before starting or jump starting the vehicle.
Note
Ensure the Imager is near room temperature before connecting it to
the charger. See the charging temperature specification. Do not
charge the Imager in hot or cold places. Charging in extreme
temperatures reduces the battery pack’s ability to hold a charge.
1. Plug the ac input of the battery charger into an ac wall outlet.
2. Plug the battery charger’s dc output into the Imagers ac adapter socket.
The optional Car Charger can also be used to recharge the Imager’s battery.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...