Loading ...
Loading ...
Loading ...
Before using for the first time en-us
23
Level Upper rack Lower rack
2 max. ø 8" 12"
3 max. ø 9" 11"
Before using for the first time
8 Before using for the
first time
Before using for the first time
8.1 Initial use
Before the first use, or after a fac-
tory reset, you will need to config-
ure the settings.
Tip:Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the HomeConnect™ app.
→
"HomeConnect™ quick start",
Page37
Requirement:The appliance has
been installed and connected.
1. Add special salt.
2.
Add rinse aid. →
Page25
3. Switch on the appliance.
→
Page32
4. Set the water softening system.
5. Set the amount of rinse aid.
6. Add detergent.
7. Start the Program with the
highest cleaning temperature
without dishware.
To remove any marks from wa-
ter or other residues, we rec-
ommend you operate the appli-
ance without dishware before
using it for the first time.
Tip:You can change these set-
tings and other Basic settings at
any time.
Water softening system
9 Water softening
system
Water softening system
Hard water leaves limescale on
dishware as well as the washing
tank, and parts of the appliance
may become blocked.
To ensure good dishwashing re-
sults, you can treat the water with
special salt and the water soften-
ing system. To avoid damage to
the appliance, water with a hard-
ness above 9°E must be soft-
ened.
9.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be se-
lected here.
You can find out how hard your water is from your local water company
or by using a water hardness tester.
Water hard-
ness °E
Hardness
range
mmol/l Setting value
0 - 8 soft 0 - 1.1 H:00
9 - 10 soft 1.2 - 1.4 H:01
11 - 12 medium 1.5 - 1.8 H:02
13 - 15 medium 1.9 - 2.1 H:03
16 - 20 medium 2.2 - 2.9 H:04
Loading ...
Loading ...
Loading ...