Loading ...
Loading ...
Loading ...
14
Note:
In the supplied screw package, both self-tapping screws and
expansion blots are contained.
If the wall is cement, expansion blots are required to fix the
camera. If the wall is wooden, self-tapping screws are
required.
5. Route the cables through the cable hole or the side opening.
6. Align the camera with the back box/base plate, and tighten
the screws to secure the camera with the back box/base
plate.
Type I Camera：
Type II Camera：
Figure 2. 3 Fix the camera to the Ceiling
7. Connect the corresponding cables, such as power cable and
video cable.
8. Power on the camera to check whether the image on the
monitor is gotten from the optimum angle. If not, adjust the
camera according to the figure below to get an optimum
angle.
Loading ...
Loading ...
Loading ...