Loading ...
Loading ...
Loading ...
• Make adjustments while Trail Mower is not running.
• There is approximately 1 ½” to 4 ½” of height adjustment.
• Rotate height adjust crank handle in a clockwise direction to lower the mower
deck. A counter-clockwise direction is used to lift the mower deck.
• Graduated scales are for reference only, not the actual cutter height.
• Bring the tow vehicle to a complete stop, shut off the engine, and set the
parking brake.
• Disengage the blades.
• Manually switch the toggle switch and/or key switch to their “OFF”
positions.
• Always remember to remove keys to avoid irresponsible usage.
• Adjust the cutting height.
• Double check vehicle to mower attachment.
• Start mower engine and set throttle to “FAST” for best cutting performance.
• Slowly engage blade clutch lever.
• Carefully mount vehicle and start mowing at a slow travel speed.
• Swisher recommends if the tow vehicle is equipped with a mid-mount mower
to overlap the cut approximately 6”. This may vary depending on mowing
terrain, obstacles, and/or tow vehicle. Always keep SAFETY the first
priority.
• If the tow vehicle is not equipped with a mid-mount mower, we still
recommend offsetting the mower so that the tow vehicle does not crush the
grass.
• Make adjustments while Trail Mower is not running.
• Remove hairpins NB127 from clevis pins 18842 so L-hitch 18829 can be
repositioned.
• Raise or lower hitch section to obtain proper front to back adjustment.
• Insert clevis pins in the desired hitch position and secure with hairpins.
MOWER HEIGHT ADJUSTMENT
FRONT TO BACK ADJUSTMENT
For best cutting results, the mowing deck should be raised to ½” to ¾” higher in
the rear.
TOW HITCH OFFSET
This Trail Mower has been designed to operate offset from the center of the tow
vehicle or consecutively with another Trail Mower, providing additional cutting
width. When offsetting the mower do so to the side opposite the discharge of the tow
vehicle.
STARTING TO MOW
STOPPING THE MOWING SESSION
8
Loading ...
Loading ...
Loading ...