FLUKE 190-102-III CAL User Manual for the Fluke 190-102-III CAL Color ScopeMeter with traceable certificate of calibration, 100 MHz, 2 channels

Loading ...

ScopeMeter

Test Tool

Waveform Triggers

Single Event Acquisition

To catch single events, you can perform a single shot acquisition (one-time screen update). To

set up the test tool for a single shot of the input A waveform, continue from step 3 again:

1. Use the cursor and E to select Single Shot.

The word MANUAL appears at the top of the screen indicating that the test tool is waiting for

a trigger. As soon as the test tool receives a trigger, the waveform is displayed and the

instrument is set to hold. This is indicated by the word HOLD at top of the screen. See

Figure 27.

2. Press

H to arm the test tool for a new single shot.

Note

The test tool stores all single shots in the replay memory. Use the Replay function to look

at all the stored single shots. See Replay, Zoom and Cursors.

Figure 27. Making a Single Shot Measurement

N-Cycle Trigger

N-Cycle triggering enables you to create a stable picture of for example n-cycle burst waveforms.

Each next trigger is generated after the waveform has crossed the trigger level N times in the

direction that complies with the selected trigger slope.

To select N-Cycle triggering, continue from step 3 again:

1. Use the cursor and E to select On Trigger or Single Shot, jump to Trigger Filter.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 190-102-III CAL Color ScopeMeter with traceable certificate of calibration, 100 MHz, 2 channels