Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/24230803-ds-k1t105am/bg24.png)
Figure 4-5 Wiring of RS-485 Output
Note
●
●
When the access control terminal works as a RS-485 card reader, the default RS-485 address is 1.
●
The external power supply and the access control terminal should use the same GND cable.
4.6 Device Wiring as Wiegand Card Reader
The access control terminal can access to the access control as a Wiegand card reader.
Note
When the access control terminal works as a card reader, it only supports being connected to the
controller, but does not support alarm input or output, or the connecon of external devices.
The wiring diagram is as follows:
Access Control Terminal User Manual
21
Loading ...
Loading ...
Loading ...