Loading ...
Loading ...
Loading ...
6
FUNCTIONAL DESCRIPTION
8
10
11
5
9
8. Bale handle
9. Water supply tube
10. Wheel guard handle
11. Spindle lock access
hole
12. Battery door button
13. Load indicator light
14. Hex wrench storage
1. ONE-KEY™
indicator
2. Water supply valve
3. Quick connect tting
4. Scrench storage
5. Rear handle
6. Trigger
7. Battery door
2
3
1
6
7
4
13
14
12
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, press the battery door but-
ton and open the battery door. Push in the release
buttons and pull the battery pack away from the tool.
WARNING
Always remove the battery pack
any time the tool is not in use.
To insert the battery, press the battery door button
and open the battery door. Slide the pack into the
body of the tool. Make sure it latches securely into
place. Close battery door.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Adjusting the Guard
This tool is shipped with a guard. Always use a guard
when operating this tool.
To adjust the guard, push the wheel guard handle
forward or pull it back to move the guard to the de-
sired location. WARNING! Always adjust the guard
to provide the operator with maximum protection
while operating.
Installing/Removing Cut-O Wheels
WARNING
To reduce the risk of injury, the
operator should be instructed in
the use, care and protection of cut-o wheels.
Use only the proper wheel made for this tool. DO
NOT USE ANY TYPE OF SAW BLADE. USE ONLY
TYPE "1" ABRASIVE and Diamond WHEELS.
1. To install the cut-o wheel, remove the battery
pack and place the tool on a rm surface.
2. Slide the inner ange, cut-o wheel and outer
ange over the spindle.
Spindle
bolt
Outer ange
Inner ange
Spindle
Wheel
3. While holding the spindle in place with the hex
wrench (1), install and tighten the spindle bolt
securely with the scrench (2).
1
2
Loading ...
Loading ...
Loading ...