Loading ...
Loading ...
Loading ...
Chapter 7 Digital Channel RIGOL
DS1000Z User Guide 7-1
Chapter 7 Digital Channel
DS1000Z Plus can provide 16 digital channels when it has been upgraded with the
MSO upgrade option. For the digital channels, the oscilloscope compares the
voltages acquired in each sample with the preset logic threshold. If the voltage of the
sample point is greater than the logic threshold, it will be stored as logic 1; otherwise,
it will be stored as logic 0. The oscilloscope displays the logic 1 and logic 0 in figure
form for users to easily detect and analyze the errors in circuit design (hardware
design and software design). This chapter introduces how to use the digital channels
of the mixed signal digital oscilloscopes.
Before using the digital channels, connect the oscilloscope and the device under test
using RPL1116 logic probe provided in the accessories. For the using method of the
logic probe, refer to the
RPL1116 Logic Probe User Guide
.
Note: The digital channel input terminal does not support hot plug. Please do not
insert or pull out the logic probe when the instrument is powered on.
The contents of this chapter:
To Select the Digital Channel
To Turn on/off the Digital Channel
Group Set
To Set the Waveform Display Size
Reorder Setting
Auto View
To Set the Threshold
To Set the Label
Probe Calibration
Digital Channel Delay Calibration
Loading ...
Loading ...
Loading ...