Loading ...
Loading ...
sharkclean.com sharkclean.com
ASSEMBLY
1. Place the Pod onto the Floor Nozzle Post.
2. Insert the Wand into the pod.
3. Attach the Lower Accessory Holder to the pod.
4. Insert the Handle into the wand.
5. Connect the Hose to the back of the pod.
6. Store Accessories on the Tool Storage Posts.
For proper operation, ensure all parts are firmly clicked into place.
(Click)
1
(Click)
2
(Click)
4
(Click)
5
3
Press the Power/Surface Switch at the top of
the pod.
Select surface setting:
O O
I Hard Floor
For hard floors and small area rugs.
II Carpet
For carpets.
POWER/SURFACE SWITCH SUCTION CONTROL
INDICATOR LIGHT
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use setting II, Carpet.
NOTE: Brushroll spins in Carpet mode only.
Rotate the Suction Control Slider on the
handle to adjust the suction depending on
the floor type.
MIN: to reduce suction and increase
maneuverability on carpets.
MAX: to increase suction on hard floors.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushroll is spinning and working as intended.
Solid Red: There is a jam in the brushroll area. Turn o the vacuum and unplug it, then remove
any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn o the vacuum, unplug it, and
remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting.
See Troubleshooting section for more information.
Loading ...
Loading ...
Loading ...