Loading ...
Loading ...
Loading ...
5.
Adjust the zoom rao of the camera so that the size of the vehicle in the image is close to that of
the red frame. Only the posion of red frame is adjustable.
Note
Only 1 license plate can be captured at one me for each lane.
6.
Select Region and Country/Region.
7.
Select the license plate informaon upload mode.
Entrance/Exit The license plate informaon of the detected vehicle will be uploaded when
the vehicle passes the detecon area and triggers the detecon in entrance/
exit.
City Street The license plate informaon of the detected vehicle will be uploaded when
the vehicle passes the detecon area and triggers the detecon in city
streets.
Alarm Input It means the input alarm will trigger a license plate capture and recognion
acon.
Note
●
When Alarm Input is selected, the alarm input A<-1 will automacally be assigned to trigger
vehicle detecon and its alarm type is always NO.
●
If the A<-1 alarm input is used to trigger vehicle detecon, it can not be used for other basic
events.
●
When Alarm Input is selected and saved, previously congured linkage method for A<-1 will
be canceled.
8.
Select the Detecon mode.
9.
Check Remove Duplicated License Plates and set the Time Interval. The default me interval is
4 minutes.
10.
Set arming schedule and linkage method. For the arming schedule sengs, refer to Set Arming
Schedule . For the linkage method sengs, refer to Linkage Method Sengs .
11.
Click Save.
10.4.2 Set Mixed-Trac Detecon Rule
The motor vehicles and non-motor vehicles that enter the set lane can be detected, and the
picture of targets can be captured and stored. Alarms will be triggered and captures can be
uploaded.
Before You Start
Go to VCA → VCA Resource , and select Road Trac.
Steps
1.
Go to VCA → Road Trac → Detecon Conguraon , and select Mixed-trac Detecon as
detecon type.
Network Camera User Manual
98
Loading ...
Loading ...
Loading ...