Loading ...
Loading ...
Loading ...
4. CONTROL PANEL
1 2 3 4 5
1
Power indicator light
2
Temperature regulator and On/Off switch
3
Super light
4
Super switch and alarm reset switch
5
Alarm light
4.1 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clockwise
to a medium setting.
If the temperature inside the appliance is too
high, the Alarm light will blink and the
acoustic alarm will turn on.
3. Push the Super switch and the acoustic
alarm will turn off. The Alarm light will
blink until the internal temperature has
reached a level required for the safe
conservation of frozen food.
4.2 Switching off
1. Turn the Temperature regulator to the "O"
position.
The Power indicator light will switch off.
2. Remove the plug from the wall socket.
4.3 Temperature regulation
The temperature is regulated automatically.
However, you can set a temperature inside
the appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator clockwise
to obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
4.4 Super function
The Super is used to perform pre-freezing
and fast freezing in sequence of Freezer
compartment. This function accelerates the
freezing of fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the
Super function at least 24 hours before
placing the food to complete pre-freezing.
To switch on the function:
1. Press the Super switch for 2-3 seconds to
activate the Super function. The Super
light will switch on.
2. Place the food in the freezing
compartment and keep the Super
function switched on for further 24 hours.
Refer to "Freezing fresh food" section.
This function stops automatically after
52 hours. It is possible to deactivate the
function at any time by pressing the
Super switch for 2-3 seconds.
ENGLISH 23
Loading ...
Loading ...
Loading ...