Loading ...
Loading ...
Loading ...
12
your area, calcium deposits (scale) may build
up in your coffeemaker. Though scale is not
toxic, it can affect performance. Descaling the
coffeemaker when the indicator signals it is
time to do so will help protect the heating
element and other parts that come into contact
with water.
For optimal performance, descale coffeemaker
every three to six months. If calcium deposits
build up faster, the CLEAN button indicator
light will illuminate, indicating the coffeemaker
should be descaled.
To clean:
1. Remove the charcoal water filter from the
holder. Fill the water reservoir to capacity with
a mixture of
1
⁄
3
white vinegar and
2
⁄
3
water.
2. Turn the function knob to BREW, and press
and hold the CLEAN button. When the
CLEAN LED indicator flashes, the
coffeemaker is in CLEAN mode. Release
the button.
3. When the cycle is completed, five beeps
will sound and the coffeemaker will enter
standby mode.
4. If the CLEAN indicator illuminates once
more, repeat the cleaning procedure with
a fresh solution of vinegar and water.
NOTE: One cleaning cycle is usually sufficient.
5. When the CLEAN indicator remains off,
run one cycle with a full reservoir of fresh
cold water to rinse the unit.
6. Return the charcoal water filter to the
holder inside the water reservoir and your
coffeemaker is ready to brew!
MAINTENANCE
Any other servicing should be performed by
an authorized service representative.
SETTING UP YOUR
SINGLE-SERVE
COFFEEMAKER
INITIAL CLEANING
Perform an initial cleaning before making
your first beverage. Follow these
instructions, without inserting a capsule.
1. Insert the charcoal water filter if you
haven’t already. Instructions on page 9.
2. Remove the water reservoir from the unit.
3. Fill the reservoir in the sink and put back
on the unit.
4. If you haven’t already, plug the power cord
into an independent outlet.
5. Open and close the brew head. Do not
add a capsule.
6. Place a mug on the drip tray.
7. Press the POD button and toggle through
brew sizes to get to 10 oz cup. Press the
BREW/OFF button. The indicator light will
flash slowly, and the hot water will start to
dispense momentarily.
8. The one-time cleaning process is
complete. Discard the hot water. Your
brewer is ready to use.
Loading ...
Loading ...
Loading ...