Loading ...
Loading ...
Loading ...
6
Toasting Instructions
1. Before toasting, make sure both the left and right crumb trays are in position on the bottom
of the toaster and the and both left and right toasting levers are in the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place toaster on a at, level, heat
resistant surface.
3. Remove all protective wrappings from food before placing into the toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged
in toasting slot(s).
4. Plug the power cord into a 120V AC electrical outlet.=
5. Insert bread or toaster food into 1 to 4 the toasting slot(s). Lower the corresponding left or right
toasting lever(s) until locked into place. The automatic centering guides hold food upright for
uniform side-to-side toasting. When the bread is lowered into position, the corresponding left
or right CANCEL button(s) will illuminate, and toasting will begin.
NOTE: The toasting lever(s) will not lock into position unless the toaster is plugged into a 120V AC
electrical outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a re hazard, never place bread over the opening of the toaster; always place
bread into the slots.
NOTE: DO NOT change the browning selection during the toasting cycle. Press any illuminated
CANCEL button(s); then turn the browning control dial to adjust. Lower the corresponding left or
right toasting lever(s) and toast until the desired toast color is achieved.
6. At the end of the toasting cycle, bread or toaster food will rise automatically. Use the high lift lever
to remove smaller toaster foods or breads such as English mufns.
7. Remove bread from toasting slot(s). Use care when removing bread as the bread and the top of the
toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage
the heating element or cause injury.
8. To interrupt toasting, press either the left or right or both illuminated CANCEL button(s).
9. Unplug cord from wall outlet when not in use and before cleaning. Do not attempt to dislodge food
when the toaster is plugged in.
Reheat Cycle
1. Use the reheat to warm through toasted bread or any toaster food that has cooled.
Rotate the browning control dial to Reheat.
NOTE: This toaster has a special setting for reheating toast, which overrides the toaster’s
browning setting.
IMPORTANT: Use REHEAT cycle with plain, unbuttered toast ONLY.
2. Place bread into 1 to 4 of the toasting slots.
3. Lower the corresponding left or right toasting lever(s) until locked into place. The automatic
centering guides hold
food upright for uniform side-to-side toasting. The corresponding CANCEL button(s) will illuminate
and the REHEAT cycle will begin.
4. At the end of the REHEAT cycle, the toasting lever(s), reheated bread or toaster food will rise
automatically, and the toaster will turn OFF.
5. Remove bread or toaster food from the toasting slot(s). Use care as the top of the toaster will still
be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage
the heating element or cause injury.
6. To interrupt the REHEAT cycle, press the corresponding illuminated CANCEL button(s).
7. Unplug cord from wall outlet when not in use.
Cancel Button
1. When the toasting lever is lowered, the corresponding CANCEL button(s) will illuminate,
and toasting will begin.
2. To stop or interrupt any toasting cycle, press the illuminated CANCEL button(s).
The bread or toaster food will automatically rise; the toaster will turn OFF.
3. Unplug cord from wall outlet when not in use.
.
17263_BELLA 4-sliceToaster_IM R1.indd 617263_BELLA 4-sliceToaster_IM R1.indd 6 2021-03-16 10:13 AM2021-03-16 10:13 AM
Loading ...
Loading ...
Loading ...