Loading ...
Loading ...
Loading ...
Clamp Meters
Safety Information
5
• Adhere to local and national safety codes. Individual protective equipment must
be used to prevent shock and arc blast injury where hazardous live conductors
are exposed.
• Disconnect circuit power and discharge all high-voltage capacitors before you
measure resistance, continuity, or capacitance.
• For the 374 and 375, do not measure ac/dc current in circuits carrying more than
1000 V or 600 A with the Meter Jaw.
• For the 376, do not measure ac/dc current in circuits carrying more than 1000 V
or 1000 A with the Meter Jaw.
• Never operate the Meter with the back cover removed or the case open.
• Do not measure ac current in circuits carrying more than 1000 V or 2500 A with
the Flexible Current Probe.
• Do not apply the Flexible Current Probe around or remove from HAZARDOUS
LIVE conductors.
• Do not use the flexible current sensor if the inner contrasting insulation color is
showing.
• Take special care during fitting and removal of the Flexible Current Probe. De-
energize the installation under test or wear suitable protective clothing.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...