Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
44
Enter the account name registered on EHome protocol.
EHome Key
Enter the EHome key if you have set it when configuring network center parameter for the
device.
Note
This function should be supported by the device.
6. Optional: Check Synchronize Time to synchronize the device time with the PC running the client
after adding the device to the client.
7. Optional: Check Import to Group to create a group by the device name.
8. Finish adding the device.
– Click Add to add the device and back to the device list page.
– Click Add and New to save the settings and continue to add other device.
9. Optional: Click on Operation column to view device status.
6.1.5 Import Devices in a Batch
The devices can be added to the software in a batch by entering the device information in the pre-
defined CSV file.
Steps
1. Enter the Device Management page
2. Click Add to open the adding device window.
3. Select Batch Import as the adding mode.
4. Click Export Template and then save the pre-defined template (CSV file) on your PC.
5. Open the exported template file and enter the required information of the devices to be added
on the corresponding column.
Adding Mode
You can enter 0 or 1 which indicated different adding modes. 0 indicates that the device is
added by IP address or domain name; 1 indicates that the device is added via EHome.
Address
Edit the address of the device. If you set 0 as the adding mode, you should enter the IP
address or domain name of the device; if you set 1 as the adding mode, this filed is not
required.
Port
Enter the device port No. The default value is 8000.
Device Information
If you set 0 as the adding mode, this field is not required. If you set 1 as the adding mode,
enter the EHome account.
User Name
Loading ...
Loading ...
Loading ...