Loading ...
Loading ...
3
FUNCTIONAL DESCRIPTION
10
7
8
1
3
2
1. Volume down
2. Power/Pair
3. Stereo AUX jack
4. USB power outlet
5. Fuel gauge
6. Volume up
7. Indicator light
8. Hang hook
9. Battery bay
10. Bass port
4
5
6
9
SYMBOLOGY
V
Volts
A
Amps
Hz
Hertz
Direct Current
Read Operator's Manual
Federal Communications Commission
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. ..................................................... 2592-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
USB Ouput Volts............................................. 5 DC
USB Output Amps ..............................................2.1
FCC ID ................................. 2ADDWSPEAKER-12
Recommended Ambient
Operating Temperature ......................0°F to 125°F
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
Fuel Gauge
The fuel gauge will show the remaining battery
charge for 2-3 seconds after turning on the speaker.
To signal the end of charge, 1 light on the fuel gauge will
blink slowly until the speaker shuts o automatically.
Battery Pack Protection
To protect the life of the battery pack, the speaker will
shut o when the battery’s charge becomes too low.
If this happens, remove the battery pack and charge
it according to the charger’s instructions.
Connecting an Auxiliary Device
Connect an MP3 player, CD player, or other audio
device directly to the speaker using the stereo aux-
iliary jack AUX IN.
USB Power Outlet
This outlet can be used to charge a cell phone, power
an MP3 player or any other device that uses less than
2.1A of DC electrical current.
NOTE: Any device that uses more than 2.1 A of DC
electrical current will trip a self-resetting overload
and disable the output.
OPERATION
WARNING
To reduce the risk of re or electric
shock, do not expose this speaker
to rain or moisture.
Turning On/O
and Connecting to Bluetooth
Press the Power/Bluetooth
button to turn the
speaker on and o.
• If no Bluetooth device was previously paired,
Bluetooth pairing will begin automatically and the
indicator light will ash continuously.
• The speaker will continue to search for a signal for
10 minutes.
• To manually pair a device, turn on the speaker and se-
lect "M12 Speaker" on the Bluetooth capable device.
• Once paired, the speaker will automatically reconnect
to the same device when the speaker is turned on.
• To pair the speaker to a dierent device, press
and hold the power/pair button for 3 seconds un-
til the indicator light ashes. It will then be in pair
mode and can be connected to a dierent device.
• Once the device has successfully paired with the
speaker, use the device controls to move through
tracks and control volume.
Volume
Use the
to increase or decrease the volume.
NOTE: To control the volume using the device's
controls, rst turn the speaker volume to max (a
beep will sound).
Loading ...
Loading ...
Loading ...