Model:FLS-80G
RETRO FRIDGE
Product Information
·Voltage: 110V
·Rated current: 1.1A
·Watt:60W
·Energy Used:0.75 kwh/24h
·Defrosting: Manual Defrosting
·Frequency: 60Hz
Please note that some models the interior lights are LEDs that cannot be changed.
Other models require an 10-watt bulb. Not all bulbs will fit your refrigerator - be
sure to replace the bulb with one of the same size, shape and wattage.
To Change the Light Bulb:
I. Unplug refrigerator or disconnect power.
II. Remove light shield when applicable.
III. Remove light bulb and replace with one
of the same size, shape and wattage.
IV. Replace light shield when applicable.
V. Plug in refrigerator or reconnect power.
The refrigerator has two chrome door handles that require manual
installation.
Refrigerator handle installation manual
Refrigerator
handle
handle base
handle card slot
Gap
wrong right
Attention:
Note that the card slot of the handle is embedded in the
protruding block of the base.
Push the handle hard to fit to the corresponding position.
1 8
10
9
5
7
6
2
3
4
DOOR RAIL
BOX PROFILE
