Loading ...
Loading ...
Loading ...
14
Settingthetimertoturnmorethanonecookingzoneo
automatically
Follow the steps above to programme the timer to switch more than one zone o automatically or to
change or cancel the cooking duration time.
• When the timer is controlling more than one zone simultaneously, the timer display will always show
the time remaining for the zone which is due to nish rst.
Note: In this example, the front-left zone (set to power level 6) is due to nish rst, so the timer
display shows the 5 minutes remaining for the front-left zone. The red dot ashes next to the power
level indicator for the front-left zone, to show that the timer display is currently showing the time
remaining for that zone.
• A steady dot next to the power indicator means that zone is being controlled by the timer, but the
timer display is not currently showing the time remaining for that particular zone.
To see the time remaining for any particular zone, select the relevant heating zone by touching the
relevant zone selection control key.
The time remaining for that zone will be briey displayed in the timer display
(Set to 15 minutes)
(Set to 5 minutes)
• When the cooking time has elapsed, the relevant cooking zone is switched o automatically.
The ‘H’ indicator shows in the power level display for the relevant cooking zone to indicate that it is
still hot.
Note: In this example, the cooking duration time has run down on the front-right zone, so the timer has
turned this zone o. The power level display shows ‘H’ to indicate that the surface of the glass is still
hot. The back-right zone (set to power level 5) still has 10 minutes to run, so the timer display changes
to show 10 minutes remaining. The red dot ashes next to the power level indicator for the back-right
zone, to show that the timer display is currently showing the time remaining for that zone.
Loading ...
Loading ...
Loading ...