Loading ...
Loading ...
Loading ...
Type Description
Scan Talkback Enabled During an ongoing scanned call, if the PTT but-
ton is pressed, you can talkback to the scanned
call.
NOTE:
If you face the following scenarios:
1 Scan into a call for a group that is not assigned to a channel position in the currently
selected zone
2 Miss the Hang Time of the call.
Perform the following actions:
1 Switch to the proper zone.
2 Select the channel position of the group to talk back to that group.
10.8.4
Nuisance Channels
Nuisance Channel is a channel that generates unwanted call continually.
You can temporarily remove the unwanted channel from the scan list and restore it back later on. This
capability does not apply to the channel designated as the Selected Channel.
10.8.4.1
Deleting Nuisance Channels
Prerequisites: Your radio is scanned into the Nuisance Channel.
Procedure:
1 Press the programmed Nuisance Delete button until you hear a tone.
2 Release the programmed Nuisance Delete button.
10.8.4.2
Restoring Nuisance Channels
Procedure:
Perform one of the following actions:
• Restart your radio.
• Turn off and then turn on the scan.
• Change the channel.
10.8.5
Scan Lists
You can create and assign individual channels or groups in Scan Lists. Your radio scans for voice
activity by cycling through the channel or group sequence specified in the scan list for the current
channel or group. Scan List also known as Receive Group List.
Your radio can support up to three scan lists, with a maximum of 16 members in a list. Each scan list
supports a mixture of analog and digital entries.
MN008336A01-AA
Chapter 10 : Advanced Features
34
Loading ...
Loading ...
Loading ...