FLUKE N5K6PP64IP User Manual for the Fluke N5K 6PP64IP Norma 5000 3-Phase Power Analyzer with 6 x PP64 Power Phase Input Modules, IEEE488/LAN Interface, Process Interface

Loading ...

NORMA 4000/5000

Operators Manual

7-4

Five Steps

To set up a configuration, complete the following steps:

• Call up General Setup (optional)

• Configure current and voltage channels

• Configure average time and synchronization

• Configure data transfer to printer and PC

• Save configuration

For instructions on how to configure the PI1 process interface, please refer to Chapter 9,

"NORMA Analog Interface (Optional)."

For instructions on how to delete a configuration, please refer to chapter 7 "Delete

Configuration.”

Call up General Setup and System Information Screen

General Setup

1. Switch on the Power Analyzer and the start screen is displayed.

2. Move the cursor to the menu item General Setup that shows the name of the

currently loaded configuration (in the example following, 1:W3).

3. Press Enter. The General Setup menu is displayed.

esn019.gif

System Information Screen

From the General Setup menu:

1. Press function key Info…. The System Info menu is displayed.

This screen shows the basic information about the Power Analyzer:

System Device type and sample rate

Phases Type and number of equipped power phases

Options Equipped interfaces and options

Serial Serial numbe

Version Firmware version

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE N5K6PP64IP N5K 6PP64IP Norma 5000 3-Phase Power Analyzer