Loading ...
Loading ...
Loading ...
Chapter 6 Dashboard
NWA/WAC/WAX Series User’s Guide
69
Current Login
User
This field displays the user name used to log in to the current session, the amount of
reauthentication time remaining, and the amount of lease time remaining.
Boot Status This field displays details about the Zyxel Device’s startup state.
OK - The Zyxel Device started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the configuration
failed after a firmware upgrade.
System default configuration - The Zyxel Device successfully applied the system default
configuration. This occurs when the Zyxel Device starts for the first time or you intentionally
reset the Zyxel Device to the system default settings.
Fallback to lastgood configuration - The Zyxel Device was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.
Fallback to system default configuration - The Zyxel Device was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Booting in progress - The Zyxel Device is still applying the system configuration.
Management
Mode
This shows whether the Zyxel Device is set to work as a stand alone AP.
Power Mode This displays the Zyxel Device’s power status.
Full - the Zyxel Device receives power using a power adapter and/or through a PoE switch/
injector using IEEE 802.3at PoE plus or IEEE 802.3bt (WAX650S only at the time of writing).
Limited - the Zyxel Device receives power through a PoE switch/injector using IEEE 802.3af
PoE or IEEE 802.3at PoE plus (WAX650S only at the time of writing) even when it is also
connected to a power source using a power adapter.
When the Zyxel Device is in limited power mode, the Zyxel Device throughput decreases
and has just one transmitting radio chain.
It always shows Full if the Zyxel Device does not support power detection. See Section 1.4 on
page 19.
Bluetooth This field displays the Zyxel Device’s Bluetooth Low Energy (BLE) capability. Bluetooth Low
Energy, which is also known as Bluetooth Smart, transmits less data over a shorter distance
and consumes less power than classic Bluetooth. The Zyxel Device communicates with
other BLE enabled devices using advertisements.
N/A displays if the Zyxel Device does not support BLE.
Unavailable displays if the Zyxel Device supports Bluetooth, but there is no BLE USB dongle
connected to the USB port of the Zyxel Device. Some Zyxel Devices, such as the WAC5302D-
S, need to have a supported BLE USB dongle attached to act as a beacon to broadcast
packets.
Available displays if the Zyxel Device supports Bluetooth and detects a BLE device but
advertising is inactive.
Advertising displays if the Zyxel Device supports Bluetooth, detects a BLE device, and
advertising is activated, which means the Zyxel Device can broadcast packets to every BLE
device around it.
Interface Status
Summary
If an Ethernet interface does not have any physical ports associated with it, its entry is
displayed in light gray text. Click the Detail icon to go to a (more detailed) summary screen
of interface statistics.
Name This field displays the name of each interface.
Table 26 Dashboard (continued)
LABEL DESCRIPTION
Loading ...
Loading ...
Loading ...