DS-2CD2423G0-IW User Manual

Loading ...

Set Vehicle Detecon

The vehicles that enter the set lane can be detected and the picture of the vehicle and its license

plate can be captured and stored. Alarms will be triggered and captures can be uploaded.

Before You Start

Go to VCA → VCA Resources , and select Road Trac.

Steps

Go to VCA → Road Trac → Detecon Conguraon , and select Vehicle Detecon as detecon

type.

Check Enable.

Select the total number of lanes.

Click and drag the lane line to set its posion, or click and drag the line end to adjust the length

and angle of the line.

Adjust the zoom rao of the camera so that the size of the vehicle in the image is close to that of

the red frame. Only the posion of red frame is adjustable.

Note

Only 1 license plate can be captured at one me for each lane.

Select Region and Country/Region.

Select the license plate informaon upload mode.

Entrance/Exit The license plate informaon of the detected vehicle will be uploaded when

the vehicle passes the detecon area and triggers the detecon in entrance/

exit.

City Street The license plate informaon of the detected vehicle will be uploaded when

the vehicle passes the detecon area and triggers the detecon in city

streets.

Alarm Input It means the input alarm will trigger a license plate capture and recognion

acon.

Note

●

When Alarm Input is selected, the alarm input A<-1 will automacally be assigned to trigger

vehicle detecon and its alarm type is always NO.

●

If the A<-1 alarm input is used to trigger vehicle detecon, it can not be used for other basic

events.

●

When Alarm Input is selected and saved, previously congured linkage method for A<-1 will

be canceled.

Select the Detecon mode.

Check Remove Duplicated License Plates ans set the Time Interval. The default me interval is 4

minutes.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2423G0-IW 2 MP Indoor WDR Fixed Cube Network Camera