Hikvision DS-2SE7C144IW-AES5 Hikvision Network Speed Dome Camera User Manual

Loading ...

8.2.3 Set Line Crossing Detecon

Line crossing detecon is used to detect the object movement of crossing a predened line. When

it occurs, the device takes linkage

acons as response.

Steps

Go to Conguraon → Event → Smart Event → Line Crossing Detecon .

Select a channel.

Check Enable.

Oponal: Click Lock to lock PTZ control to prevent the interrupon from other PTZ related acon

during conguraon.

Normally, the PTZ control is automacally locked when you enter the conguraon interface.

You can manually resume the lock when the countdown is over.

Adjust the live image to the desired scene by using PTZ control buons.

Note

PTZ control is only available for Camera 01.

Draw detecon line.

1) Select a Line No.. Up to 4 lines can be set in the scene.

2) Click Detecon Area.

A yellow line is displayed on live image.

3) Click on the line, and drag its end points to adjust the length and

posion.

4) Select the Direcon for the detecon line.

Direcon

It stands for the direcon from which the object goes across the line.

A<->B

The object going across the line from both

direcons can be detected and alarms are

triggered.

A->B

Only the object crossing the congured line from side A to side B can be detected.

B->A

Only the object crossing the congured line from side B to side A can be detected.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2SE7C144IW-AES5 DS-2SE7C144IW-AE S5 4MP 32x TandemVu IR Network Speed Dome