Hikvision DS-KV6113-WPE1~EOL DS-KV6113-WPE1 User Manual

Loading ...

2) Set the Negave Floor.

3) Select the Interface Type as RS-485 or Network Interface. And enable the

elevator control.

If you select RS-485, make sure you have connected the door staon to the

elevator controller with RS-485 wire.

If you select Network interface, enter the elevator controller's IP address,

port No., user name, and password.

Note

•

Up to 4 elevator controllers can be connected to one door staon.

•

Up to 10 negave oors can be added.

•

Make sure the interface types of elevator controllers, which are connected

to the same door staon, are consistent.

Input and Output

Click Intercom → Input and Output to enter the sengs page.

Figure 5-15 IO Input and Output

Select I/O Input No., Input, I/O Output No. and Output.

Click Save to enable the sengs.

Time Parameters

Click Time Parameters to enter the page.

Congure the me parameters and click Save.

Video Intercom Villa Door Staon User Manual

Loading ...

Hikvision DS-KV6113-WPE1~EOL DS-KV6113-WPE1 Pro Video Intercom Villa Door Station