Loading ...
Loading ...
Loading ...
Chapter 3
Getting Started
This chapter provides instructions on how to prepare your radio for use.
3.1
Charging the Battery
Your radio is powered by a Lithium-Ion (Li-Ion) battery.
Prerequisites: Turn off your radio when charging.
Procedure:
• Charge your battery only in non-hazardous areas. After battery is charged, allow your radio to
rest for at least 3 minutes.
• To comply with warranty terms and avoid damage, charge the battery using a Motorola
Solutions authorized charger as described in the charger user guide.
• Charge a new battery 14 to 16 hours before initial use for best performance.
Batteries charge best at room temperature.
3.2
Attaching the Battery
Procedure:
1 Align the battery with the rails on the back of the radio.
2 Press the battery firmly, and slide upwards until the latch snaps into place.
3 Slide battery latch into lock position.
Postrequisites:
NOTE:
If the radio is attached with the wrong battery, your radio shows the following indications:
• A low pitched warning tone sounds.
• The red LED blinks.
• The display shows Wrong Battery
• Voice Announcement or Text‑to‑Speech sounds "Wrong Battery" if the Voice Announcement
or Text‑to‑Speech is loaded by using CPS.
If the radio is attached with an unsupported battery, your radio shows the following indications:
• An alert tone sounds.
• The display shows Unknown Battery.
• Battery icon is disabled.
The certification of the radio is voided if you attach a UL battery to an FM approved radio or vice
versa.
If your radio is attached with an unsupported or wrong battery, immediately swap with the
correct battery.
MN008336A01-AA
Chapter 3 : Getting Started
10
Loading ...
Loading ...
Loading ...