Loading ...
2
Table Of Contents
1. Important Safety Information
SAVE THESE INSTRUCTIONS
Prior to installation, operation, maintenance or servicing of this equipment, read this manual thoroughly.
Only qualified personnel may install, operate, maintain and service this equipment. The following symbols may appear to warn
of potential danger and hazards.
CAUTION This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by person responsible for their safety. Children should be supervised to ensure that they do not play with the
appliance.
This appliance is classified as APPLIANCE NOT ACCESSIBLE TO THE GENERAL PUBLIC. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The appliance
shall be installed in accordance with national wiring regulations
A user-supplied all-pole disconnection device which has at least 0.118 in. (3 mm) separation distance in all-pole and a
residual current device (RCD) with a rating of above 10mA shall be incorporated in the fixed wiring, according to the National
Electrical Code (NEC) standards.
1.1 Explanation of Symbols
The following symbols illustrate messages to warn of potential danger and need for caution and attention.
This symbol indicates that with failure to comply with the instructions, there will be a risk of electric shock resulting in
injury, as noted in the “DANGER” or “WARNING” safety labels.
This is a safety alert symbol used to warn of potential personal injury hazards. Follow all safety information to avoid
personal injury or death that may arise.
1. Important Safety Information 2
1.1 Explanation of Symbols 2
1.2 Handling Information 3
2. Operation and Maintenance 5
2.1 Introduction 5
2.2 Home Screen 6
2.2.1 Settings Menu 7
2.2.2 Maintenance Mode 9
2.3 Data Menus 9
2.4 Graph Menu 10
2.5 Alarm Menu 11
2.6 Regular User Maintenance 12
2.7 Alarms and FAQ 12
3. Warranty and
Product Registration 16
For installation instructions, refer to separate Installation Manual.
Loading ...
Loading ...
Loading ...