5
YEAR
WARRANTY
13
13
2 34 5
2 34 5
4 5
INTRODUCTION
Thank you for purchasing the Hume Ultrasonic Cool Mist Humidifier from
Pure Enrichment. This sleek and modern humidier is the perfect solution for
moisturizing the dry air in your home and ofce. The diagram below explains
all of the pieces you will nd inside the box. Setup is quick and easy, but be
sure to follow all instructions to ensure safe and effective use.
PRODUCT SPECIFICATIONS
Size: 8.3” (L) x 6.7” (W) x 11.8” (H)
Power: 120V, 60Hz, 25W
Max Room Coverage: Up to 270 sq. ft.
Max Run Time*: 12 hours on high
Tank Capacity: 3.5 Liters (.92 Gallons)
Max Moisture Output: 300ml/h on high
70ml/h on low
Noise <35dB
*
Run time may vary depending on water quality, room temperature, and the
amount of water in the tank.
6 7
4 5
INTRODUCTION
Thank you for purchasing the Hume Ultrasonic Cool Mist Humidifier from
Pure Enrichment. This sleek and modern humidier is the perfect solution for
moisturizing the dry air in your home and ofce. The diagram below explains
all of the pieces you will nd inside the box. Setup is quick and easy, but be
sure to follow all instructions to ensure safe and effective use.
PRODUCT SPECIFICATIONS
Size: 8.3” (L) x 6.7” (W) x 11.8” (H)
Power: 120V, 60Hz, 25W
Max Room Coverage: Up to 270 sq. ft.
Max Run Time*: 12 hours on high
Tank Capacity: 3.5 Liters (.92 Gallons)
Max Moisture Output: 300ml/h on high
70ml/h on low
Noise <35dB
*
Run time may vary depending on water quality, room temperature, and the
amount of water in the tank.
6 7
6 7
8 9
6 7
8 9
8 9
TROUBLESHOOTING
If you are having problems with your humidifier, see if one of the solutions
below can resolve the problem before contacting the manufacturer.
Problem Solution
No mist coming out
Power plug:
Unplug and then try again.
Power failure:
When power returns, try again.
Tank installation:
Ensure tank is attached properly.
Dirty ultrasonic disk:
Clean disk (see pg. 8)
Abnormal mist
Excessive water:
Pour out extra water.
Residue inside tank:
Wash tank and try again.
Dirty ultrasonic disk
: Clean disk (see pg. 8)
If you use hard water, replace with softer water.
Bad/strange smell
Unit is new:
Clean water tank as instructed, then
use after air drying
Poor maintenance or dirty water:
Clean
humidier thoroughly, and ll with fresh water.
White dust is forming on
nearby furniture
Hard water may deposit a certain of dust:
Dust
in the air also settles because of added humidity
in the room. Use distilled water if it persists.
Unit shut off automatically
No or low water:
Unplug unit and rell tank.
Mist is accumulating
around the unit
Saturation of humidity:
Lower mist control
setting.
Unit not level and water is accumulating:
Unplug and place on level surface.
Point mist nozzle away from objects:
Raise unit
on a water-resistant level surface 2-3 feet off of
oor.
Unit making a loud noise
Unit must be placed on a at, level, hard
surface:
Make sure it is NOT placed on a soft or
absorbent surface.
Indicator light is ashing
from blue to red to blue
Unit is running low on water:
Rell the water
tank with fresh water.
10 11
8 9
TROUBLESHOOTING
If you are having problems with your humidifier, see if one of the solutions
below can resolve the problem before contacting the manufacturer.
Problem Solution
No mist coming out
Power plug:
Unplug and then try again.
Power failure:
When power returns, try again.
Tank installation:
Ensure tank is attached properly.
Dirty ultrasonic disk:
Clean disk (see pg. 8)
Abnormal mist
Excessive water:
Pour out extra water.
Residue inside tank:
Wash tank and try again.
Dirty ultrasonic disk
: Clean disk (see pg. 8)
If you use hard water, replace with softer water.
Bad/strange smell
Unit is new:
Clean water tank as instructed, then
use after air drying
Poor maintenance or dirty water:
Clean
humidier thoroughly, and ll with fresh water.
White dust is forming on
nearby furniture
Hard water may deposit a certain of dust:
Dust
in the air also settles because of added humidity
in the room. Use distilled water if it persists.
Unit shut off automatically
No or low water:
Unplug unit and rell tank.
Mist is accumulating
around the unit
Saturation of humidity:
Lower mist control
setting.
Unit not level and water is accumulating:
Unplug and place on level surface.
Point mist nozzle away from objects:
Raise unit
on a water-resistant level surface 2-3 feet off of
oor.
Unit making a loud noise
Unit must be placed on a at, level, hard
surface:
Make sure it is NOT placed on a soft or
absorbent surface.
Indicator light is ashing
from blue to red to blue
Unit is running low on water:
Rell the water
tank with fresh water.
10 11
