Loading ...
Loading ...
Loading ...
Operating Your Heater
HEATER CONTROL
Ensure heater is on a flat, stable, heat-resistant surface. Once the heater is in a safe operating
position and all switches are in the off position, insert the power plug into the mains outlet.
Turn the Power Switch at the back of the heater to the 'I' position. The heater is now in
STANDBY mode.
The heater can be operated by the touchscreen control panel or remote control. When an
operation has been selected, the relevant LED light on the control panel will display.
ON/OFF: Turns the heater ON/OFF while in STANDBY mode. The LED light will display the
current room temperature and begin to blow out room temperature air. Touch ON/OFF again
to turn unit OFF. To assist in protecting the internal components, when the unit is turned OFF
the fan will continue to blow room temperature air for a period of 30-60 seconds before
shutting down to standby.
DO NOT TURN OFF AT THE MAIN POWER SWITCH OR THE WALL DURING THIS TIME.
'+' and '-' : Increases/ Decreases the desired temperature and puts heater into Auto (Ai) mode.
When the temperature is set more than 4℃ higher than the room temperature, the heater will
run on high mode. When the set temperature is equal to or less than 4℃ higher than the room
temperature, the heater will run on low mode. When the set temperature is equal to or lower
than the room temperature, the heater will run on fan mode and blow out room temperature
air.
MODE: Change the mode between Low heat, High heat and Fan mode. The LED will display the
below images on the relevant setting:
Fan
Low Heat
High Heat
TIMER: Turns on Timer. When the heater is ON, use the Timer mode to set timer to turn the
heater OFF. When the heater is OFF, use the Timer mode to set timer to turn the heater ON.
Increase timer amount by 1 hour each time you press the TIMER button, up to a maximum of 9
hours. Use the '+' and '–' controls to set the desired temperature, and once the LED stops
flashing the timer function has been set.
SWING: Turns oscillation ON/OFF.
Loading ...
Loading ...
Loading ...