Loading ...
Loading ...
Loading ...
Firmware Ver. 2.0 – Compatible with Frame.io Camera to Cloud
F-24
Notes When Using USB Tethering
•
For information about the tethering function of your smartphone, refer to the
operating instructions of the smartphone and the contract you have with the
cell-phone provider.
Depending on the contract you have, there may be limitations on tethering or it
may incur large additional charges.
•
Set [Frame.io Connection] to [OFF] if you are not going to connect with
Frame.io.
When set to [ON], if the [Connection Method] is set to [USB Tethering], power is
supplied from the battery of this camera to the connected device, so the battery
will be consumed faster.
•
For information about the high temperature display
When the temperature of the camera rises, [ ] appears blinking on the screen.
If you continue to use the camera, a message indicating that the camera cannot
be used is displayed on the screen and some functions, such as recording and
HDMI output, will be stopped. Wait for the camera to cool down and for the
message indicating that the camera can be used again. When the message
indicating that it can be used again is displayed, turn the camera off then on
again.
•
The network connection light does not light when connected to the internet via
USB tethering.
•
After connecting via USB tethering, when charging the battery in the camera,
make sure that the charging light of the camera lights red.
If the charging light does not light, reconnect the USB connection cable while the
camera is turned off.
Loading ...
Loading ...
Loading ...