Avoid work that imposes a sideways load on
ladders, such as side-on drilling through solid
materials.
DO NOT carry equipment which is heavy or
diculttohandlewhileusingaladder.
DO NOT wear unsuitable footwear when climbing
a ladder.
DO NOTusetheladderifyouarenottenough.
Certain medical conditions or medication, alcohol
or drug abuse could make ladder use unsafe.
DO NOT spend long periods on a ladder without
regular breaks (tiredness is a risk).
Prevent damage of the ladder when transporting
e.g. by fastening and, ensure they are
suitably placed to prevent damage.
Ensure the ladder is suitable for the task.
DO NOT use the ladder if contaminated, e.g.
with wet paint, mud, oil or snow.
DO NOT use the ladder outside in adverse
weather conditions, such as strong wind.
For professional use a risk assessment shall
be carried out respecting the legislation in the
country of use.
When positioning the ladder take into account
risk of collision with the ladder e.g. from
pedestrians, vehicles or doors. Secure doors
(notreexits)andwindowswherepossible
in the work area.
WARNING, electricity hazard. Identify any
electrical risks in the work area, such as overhead
linesorotherexposedelectricalequipmentanddo
not use the ladder where electrical risks occur.
Use non-conductive ladders for unavoidable
live electrical work.
STANDING LADDERS
MODEL NO’S: AXL6.V6, AXL8.V6, AXL10.V6, AXL12.V5
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
WARNING fall from ladder.
Refer to instruction manual/booklet.
Inspect the ladder after delivery. Before every use
visually inspect the ladder to check it is not
damaged and is safe to use.
DO NOT use a damaged ladder.
Maximumtotalload.
DO NOTuseladderonanunlevelorunrmbase.
DO NOT overreach.
DO NOT erect ladder on contaminated ground.
Maximumnumberofusers.
DO NOT ascend or descend unless you are
facing the ladder.
Keep a secure grip on the ladder when ascending
and descending. Maintain a handhold whilst
working from a ladder or take additional safety
precautions if you cannot.
Original Language Version
© Jack Sealey Limited
1. SAFETY SYMBOLS
AXL6.V6 AXL8.V6 AXL10.V6 AXL12.V5 Issue:2 03/10/24
Original Language Version
© Jack Sealey Limited
DO NOT use the ladder as a bridge.
DO NOT modify the ladder design.
DO NOT move a ladder while standing on it.
For outdoor use, use caution to the wind.
Ladder for professional use.
DO NOTstepothesideofstandingladderonto
another surface.
Open the ladder fully before use.
Use the ladder with restraint devices engaged
only.
Standing ladders shall not be used as a leaning
ladder unless it is designed to do so.
DO NOT stand on the top two steps/rungs of a
standing ladder without a platform and a
hand/knee rail.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
Any horizontal surface which looks like a
platform on a standing ladder that is not designed
for standing on (e.g. a plastic work tray) shall be
clearly indicated on that surface, (only if
necessary due to design of ladder).
2. REPAIR, MAINTENANCE, STORAGE
Repairs and maintenance shall be carried out by a competent person
and be in accordance with the producer’s instructions.
NOTE: A competent person is someone who has the skills to carry out
repairs or maintenance, e.g. by training from the manufacturer.
For repair and replacement of parts, e.g. feet, if necessary contact the
producer or distributor.
Ensure ladders is stored inside and dry where possible, or under cover
as a minimum.
Ladders made of or using thermoplastic, thermosetting plastic and
reinforced plastic materials should be stored out of direct sunlight.
LIST OF ITEMS TO BE INSPECTED
For regular inspection, the following items shall be taken into account:
— check that the stiles/legs (uprights) are not bent, bowed, twisted,
dented, cracked, corroded or rotten;
—checkthatthestiles/legsaroundthexingpointsforother
components are in good condition;
—checkthatxings(usuallyrivets,screwsorbolts)arenotmissing,
loose, or corroded;
—checkthatrungs/stepsarenotmissing,loose,excessivelyworn,
corroded or damaged;
— check that the hinges between front and rear sections are not
damaged, loose or corroded;
— check that the locking stays horizontal, back rails and corner braces
are not missing, bent, loose, corroded or damaged;
— check that the rung hooks are not missing, damaged, loose or
corroded and engage properly on the rungs;
— check that guide brackets are not missing, damaged, loose or
corroded and engage properly on the mating stile;
— check that ladder feet / end caps are not missing, loose,
excessivelyworn,corrodedordamaged;
— check that the entire ladder is free from contaminants (e.g. dirt,
mud, paint, oil or grease);
—checkthatlockingcatches(iftted)arenotdamagedorcorroded
and function correctly;
—checkthattheplatform(iftted)hasnomissingpartsorxingsand
is not damaged or corroded.
Ifanyoftheabovecheckscannotbefullysatised,youshouldNOT
use the ladder.
Forspecialladdertypes,furtheritemsidentiedbythemanufacturer
shall be taken into account.
AXL6.V6 AXL8.V6 AXL10.V6 AXL12.V5 Issue:2 03/10/24
