Loading ...
Loading ...
Loading ...
Part 1 – Introduction
8
Overview
Product color and design may vary depending on the
model.
Body
1
2
3
8
4
5
6
7
1
Lens
2
IR LED
3
Body
4
Stand
5
Bottom Cover
6
Cable
7
Sun Shield Screw Hole
8
SD Memory Card Slot, Factory Reset Button
• Lens
Motorized focus and zoom lens is installed.
• IR LED
A sensor in the bottom middle monitors lighting
levels and activates the IR LED during low-lighting
conditions.
• Body
The cables are connected through the stand.
• Stand
Allows you to adjust the camera direction and lens’
rotation angle. Twist the setscrews counterclockwise
and move the camera to the desired direction. Once it
is set, twist the setscrews clockwise to lock it.
• Bottom Cover
Allows you to mount the camera to the wall or ceiling
using the mounting bracket provided with the
camera.
• Cable
Refer to the Cable.
• Sun Shield Screw Hole
Allows you to screw the sun shield to the camera.
• SD Memory Card Slot
Used to insert a microSD memory card into the
camera. (An SLC (Single Level Cell) or MLC (Multi Level
Cell) card by SanDisk or Transcend is recommended)
Remove the cover on the top of the lens in order to
remove or insert the SD memory card. Make sure
that the cover is joined properly when screwing it;
otherwise, the IP67 level is not guaranteed.
• To remove/insert the SD memory card or
perform the factory reset, make sure that the
cover is joined properly when screwing it.
Otherwise, the IP67 level is not guaranteed. For
more information, contact your product retailer.
• Do not remove the SD memory card while the
system is in operation. Removing the card while
the system is in operation can cause the system
to malfunction and/or corrupt data stored on
the SD memory card.
• An SD memory card is a consumable product
with a nite service life. Prolonged use will
damage the card's memory sectors and result
in data loss or memory card failure. Test the SD
memory card regularly and replace it whenever
necessary.
• Factory Reset Button
Factory reset button is under the SD memory card
slot. Restores the camera's default factory settings. For
more information, refer to the Factory Reset.
Loading ...
Loading ...
Loading ...