Loading ...
Loading ...
3
1
Safety
Labels
WARNING
DO NOT remove safety
(or any) labels from
chipper shredder for
any reason.
Safety Labels Found On Your
Chipper Shredder
DANGER
ROTATING CUTTING BLADES.
KEEP HANDS AND FEET OUT
OF OPENINGS WHILE MACHINE
IS RUNNING.
Storage only
Operating position
HINGED UPPER CHIPPER CH U T E :
STORAGE - To save space, Chute may be
un-locked and latched in the raised position.
OPERATION - Chute must be in the lowered and
locked position. Refer to
operator's manual for proper
use of the Chipper.
DO NOT OPERATE THIS MACHINE
UNLESS THE CHUTE DEFLECTOR
HAS BEEN PROPERLY INSTALLED.
WARNING
• Do not transport machine while
engine is running.
• Shredder should not be towed on any
street, highway or public road.
• Do not tow shredder over 10 m.p.h.
• Do not allow anyone to sit or ride on
shredder.
• Do not tow shredder for long distances.
• Before towing, be certain the shredder
is correctly attached to towing vehicle.
S30228
DANGER
ROTATING CUTTING BLADES.
KEEP HANDS AND FEET OUT
OF OPENINGS WHILE MACHINE
IS RUNNING.
DANGER
• ROTATING CUTTING BLADES.KEEP HANDS
AND FEET OUT OF OPENING WHILE
MACHINE IS RUNNING.
• DO NOT OPERATE THIS MACHINE UNLESS
THE CHUTE DEFLECTOR HAS BEEN
PROPERLY INSTALLED AND IS SECURED
WITH THE HAND KNOBS.
DANGER
1/2"
Do NOT place branches over 1/2 inch
d i a m e t e r i n t o t h e l a r g e
Sh redd erHopper. Branches over 1/2
inch in diameter should be placed in
the Small Chipper Chute.
Material feed into hopper
should be metere d as
in structe d in operator's
manual to avoid clogging.
• Read the operator's manual(s) before starting and using unit.
• Keep all shields and guards in place and securely attached.
• Keep hands, feet, face, clothing and long hair out of Shredder
Hopper, Chipper Chute and Discharge Chute while the engine is
running. Rotating cutting blades inside these openings will cause
serious personal injury if contacted. Material being processed
may bounce back from inlet openings or be thrown from the
discharge chute. Long hair or loose clothing may be pulled or sucked
into the inlet openings.
• If the chipper shredder jams or becomes clogged, refer to operator's
manual on clearing a blockage.
• If engine stalls because of jam, move throttle control lever to stop
position or shut-off rocker switch to "O" OFF if equipped, before
clearing.
• Do not install remove, adjust, or service the discharge screen or any
other part while the engine is running. Blade contact can occur.
• Do not operate on uneven ground where unit is unstable.
• Do not operate with Chipper Chute in up position if equipped. Latched up
is for storage only. Unlatch, lower and lock Chipper Chute in place
before operating machine.
• Do not operate on pavement, gravel or other hard surfaces
since objects can ricochet and cause injury.
• To avoid a fire hazard, keep leaves, grass, and other
combustible materials away from hot engine and muffler.
• Keep children and others away from area of operation.
• Wear approved safety glasses, gloves and ear protection.
Loading ...
Loading ...
Loading ...