Loading ...
Loading ...
Loading ...
Administrator Mode
159
3
3.6.1.7 Face Detection
The Face function can detect for and capture face(s) in a specified area and send to an FTP
server. Select the checkbox next to Face to enable and click
to configure.
For other models NOT equipped with AI functions
Figure 3-47
1. Once enabled, define the detection area, either by drawing a desired area on the image
or select Full Screen next to Specified Area to set the entire image as detection area.
2. Configure the following functions as needed:
◼ Snapshot Sensitivity: Drag the slider to adjust the detection sensitivity.
◼ Snapshot Mode: Select Intelligent Recognition to set the maximum of repeated
face snapshots (1~30) for
Max. Same Thumbnail Image.
◼ Min. Pupillary Distance (px): Click Draw and draw in the live view window.
◼ Face Overlay: Enable to include the camera’s text overlay on the snapshot(s)
captured.
3. Under Trigger Actions, select Upload Image (Original) to upload a snapshot of the
entire image and a snapshot of the face detected upon face detection. Select Upload
Image (Target) to upload only the snapshot of the face detected.
4. For Plan, follow Step 7 at the bottom of 3.6.1.1 Cross Line.
Loading ...
Loading ...
Loading ...