Loading ...
Loading ...
Loading ...
Operation
36
Display of program duration
The duration of the program selected
appears in hours and minutes in the dis-
play before the program begins. If the
door is opened during the program, the
time left until the end of the program is
displayed.
The displayed duration may vary for the
same program. It is influenced by, for
example, the temperature of the incom-
ing water, the reactivation cycle of the
water softener, the detergent type, the
amount of dishware, and how soiled it
is.
When a program is selected for the first
time, the display will show the average
program duration for a cold water con-
nection.
The program durations shown under
“Program overview” refer to standard
test loads and temperatures.
Each time a program is run, the control
module calculates the program duration
required depending on the temperature
of the water taken into the dishwasher
and the amount of dishware.
Starting a program
Start the program by closing the door.
Risk of scalding due to hot water.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Loading ...
Loading ...
Loading ...